Much like its predecessor the Hive Nano v2 is simple but sleek in design, its casing is slightly larger at 9.5 x 9.5 x 2.5cm. The hub has 3 LEDs on the front right above a Hive logo. Along the top side of the hub there is a RJ-45 Ethernet port, a 9v AC plug, […]
Tag Archives: ZigBee
The 1st generation Hive hub (Nano v1) is simple in design but yet packs a plethora of features into its surprisingly small package. The 7.5 x 7.5 x 2.5 cm casing has no buttons and its simple status feedback is made via a multi coloured LED light which shines trough a ‘wireless beacon’ logo on […]
Since finding out that Hive have restricted their older ‘Smart’ plug from being remotely switched on/off, it become a mini obsession of mine to prove that the plug is still actually capable of being remotely controlled using ZigBee, because I was convinced that is is the same hardware as its predecessor from AlertMe. Hive only […]
I have already written a short post about Hive’s v5 API in which I document some V5’s basic calls including temperature control. In this post I document the Hive’s newer v6.1 API, again with examples of a few basic calls. In comparison to the v5 API, albeit still a REST API, v6 is quite different. […]
For anyone looking for the newer v6 API see here. Documentation of an API for the Hive platform is somewhat elusive, but this is not because of lack of demand… There are countless forum, social media and support requests begging Hive to release an API and IFTTT support, which would then empower developers to create […]
I recently upgraded my heating control to the 2nd Generation Hive Active Heating Thermostat. To ensure complete Zigbee wireless coverage throughout my house I wanted to add a signal booster plug, which would extend Zigbee’s wireless range and give me the option to move the thermostat to different rooms in the house. I contacted the […]
I have recently upgraded my remote heating setup from Horstmann Z-Wave thermostat to the Hive Zigbee Thermostat (2nd Generation). The Hive Active Heating system is an innovation of the UK energy supplier British Gas, but you do not need to have your energy supplied by British Gas to have a Hive installation, it is however […]
Taking my previous Modbus Python Script further I wanted to extend my Python script to read multiple Modbus Registers from my 4-Noks Modbus TCP/IP Zigbee gateway. The following script asks the user to provide options such as Unit ID, Function Code and Register Address which are then used to construct the appropriate Modbus TCP/IP packet […]
I have written a number of little scripts for my home automation projects, mostly in C++, Perl or Lua, however to date I have avoided writing any projects in Python. It would seem that Python is currently the latest fashion for Raspberry Pi and home automation projects so I thought I had better have a […]
Zigbee 3.0 is the unification of the Alliance’s market-leading wireless standards into a single standard. This standard will provide seamless interoperability among the widest range of smart devices and give consumers and businesses access to innovative products and services that will work together seamlessly to enhance everyday life. Zigbee 3.0 is currently undergoing testing. Many […]
- 1
- 2